Belltec




AUGERS


BD SERIES

For drilling in solid rock conditions, solid rock and concrete without rebar.

Features:
Available in 48″ length for hydraulic drives and 36″ for the TM-48, 6″, 9″, and 12″ diameters, heavy duty cast boring head, triple flighted, 3/8″ triple flighting, easy change rock teeth.


RAD SERIES

For drilling in the toughest conditions, solid rock, concrete, fractured rock, frozen ground and compacted soils.

Features:
Available in 48″ length for hydraulic drives and 36″ for the TM-48, 8″ to 36″ diameters, carbide bullet style teeth, 3/8″ thick double flighting.


SRA SERIES

For drilling in the toughest conditions, solid rock, concrete, fractured rock, frozen ground and compacted soils. 

Features:
Available in 48″ length for hydraulic drives and 36″ for the TM-48, 4.5″ to 9″ diameters, carbide bullet style teeth, 3/8″ thick double flighting.


RSA SERIES

For drilling in difficult ground conditions, compacted soils, heavy clay, asphalt, frozen ground, and fractured rock.

Features:
Available in 48″ length for hydraulic drives and 36″ for the TM-48, 4.5″ to 36″ diameters, cast boring head, hardened drive in teeth, hardened fishtail pilot, 3/8″ thick double flighting. 


SDA SERIES

For standard to moderate drilling conditions, dirt, clay and small fractured rock.

Features:
Available in 48″ and 54” overall lengths, 6″ to 36″ diameters, fabricated boring head, hardened bolt-on teeth, hardened fishtail pilot, 3/8″ thick double flighting.


PUFF AUGER

For drilling t-post holes in dirt, clay, compacted soils, frozen ground, fractured rock, solid rock and concrete.

Features:
Replaceable 2″ carbide cutting head, 1 5/8″ solid stress proof shaft.


                            

Belltec Industries TM48 Post Hole Digger mounts easily on three-point tractors with over 28 horsepower which have at least two hydraulic remote valves. Our machine’s design and performance go way beyond today’s tractor mounted post hole diggers.

Our unique system transforms a three-point tractor into a drilling machine capable of doing what the big truck rigs do: drill accurate, straight holes (to a depth of 5 ft on a single auger) in almost any drilling condition, including solid rock and concrete.

If drilling holes is a problem for you, we have the solution. Whether it be hard, dry ground, rocky soil or solid rock. We can drill it.

Frame-Guided Auger System

Twin hydraulic cylinders connect the auger carriage to the mainframe of the machine. The cylinders move the carriage up and down the mainframe slides. Adjustable feet on the mainframe may be leveled. Since the auger is guided into the ground by the mainframe, as long as the mainframe is straight and the carriage is level, the machine will drill straight holes.

The hydraulic cylinders are directly connected to the Gear Drive-Auger Carriage without any leverage or linkage. This gives much better control over the auger in rocks, roots or soft ground. If the cylinders are moved 1″, so is the auger. Movement is not multiplied by leverage or slack in linkage. A person is much less likely to corkscrew the auger through a root or in soft ground. More complete control over the augers makes the operator’s job easier and faster.

Gear Drive

The auger is powered by a heavy duty gearbox. The gearbox is protected by an automatic torque limiter within the P.T.O. shaft which instantly relieves torque when overloaded and automatically resets itself as soon as P.T.O. speed is reduced. This eliminates troublesome shear pins and down time because of broken P.T.O. shafts and cross kits.


The Belltec H-Series hydraulic auger drives are available in three models for systems operating between 10 and 35 GPM and 2000 to 3000 PSI. The H-Series planetary outperforms and has heavier components than any of its competitors.

The H-Series was the first tubular frame skid steer hitch on the market with the largest and strongest cradle. The mounting frame mounts to all modern skid loaders with the universal attach system. The H-Series units are ideal for the toughest applications, from dirt to solid rock and concrete when paired with the correct H-Series auger. The Bolt-on Output Shaft reduces downtime and costly repairs due to bent or broken shafts.

The Belltec HD-Series hydraulic auger drives are available in two models for systems operating between 20 and 60 GPM and 2000 to 3000 PSI. The HD-Series units are ideal for extreme drilling when paired with the correct H-Series Auger. The HD-Series auger drives are easily mounted to highflow skid loaders, backhoes, and excavators.

The Belltec Max Series hydraulic auger drives are available in three models for systems operating between 10 and 35 GPM and 2000 to 3000 PSI. The Max Series planetary outperforms and has heavier components than any of its competitors. The Max Series was the first tubular frame skid steer hitch on the market with the largest and strongest cradle. Its mounting frame mounts to all modern skid loaders with the universal attach system.

The Max Series units are ideal for all drilling applications from dirt to solid rock and concrete when paired with the correct H-Series Auger.

The Belltec NC-Series hydraulic auger drives are available in three models for systems operating between 6 and 30 GPM and 2000 to 3000 PSI. NC-Series auger drives are designed with a planetary gearbox to eliminate chain and sprocket reductions found on drives in this class and price range.

The rugged NC-Series Drive will give better service since all rotating parts are sealed away from harmful dirt and debris, and fully running in oil. These compact units are designed to give exceptional service under average digging conditions. The auger rotation can be reversed to free it if it becomes caught under an obstruction. The NC-Series unit are ideal for light to moderate drilling applications.